3Com MSR 30, MSR 50 manual Ipsec proposal, Related command display ipsec policy-template

2138 CHAPTER 140: IPSEC CONFIGURATION COMMANDS

seq-number: Sequence number for the IPSec policy template, in the range 1 to 10000.

Description Use the ipsec policy-templatecommand to create an IPSec policy template and enter the IPSec policy template view.

Use the undo ipsec policy-templatecommand to delete the specified IPSec policy template(s).

By default, no IPSec policy template exists.

Note that:

■Using the undo command without the seq-numberargument deletes an IPSec policy template group.

■In an IPSec policy template group, an IPSec policy template with a smaller sequence number has a higher priority.

Related command: display ipsec policy-template.

Example # Create an IPSec policy template with the name template1 and the sequence number 100.

<Sysname> system-view

[Sysname] ipsec policy-template template1 100

[Sysname-ipsec-policy-template-template1-100]

ipsec proposal

Syntax ipsec proposal proposal-name

undo ipsec proposal proposal-name

View System view

Parameter proposal-name: Name for the proposal, a case insensitive string of 1 to 15 characters.

Description Use the ipsec proposal command to create an IPSec proposal and enter its view.

Use the undo ipsec proposal command to delete an IPSec proposal.

By default, no IPSec proposal exists.

Note that an IPSec proposal created by using the ipsec proposal command takes the security protocol of ESP, the encryption algorithm of DES, and the authentication algorithm of MD5 by default.

Related command: display ipsec proposal.