3Com MSR 30, MSR 50 manual Clock timezone

2408 CHAPTER 162: BASIC CONFIGURATION COMMANDS

specifies to adopt daylight saving time from 00:00:00 of June 6 until 00:00:00 of October 1 each year from 2007 (2007 inclusive). The daylight saving time adds one hour to the current device time.

After the configuration takes effect, use the display clock command to view the result. The information such as log file and debug adopts the local time modified by time-zone and daylight saving time.

Note that:

■The time range from “start-time” in “start-date” to “end-time” in “end-date” must be longer than one day and shorter than one year. Otherwise, the argument is considered as invalid and the configuration fails.

If the current system time is in the time range specified with this command, the system time automatically adds “add-time” after the execution of this command.

Related command: clock datetime, clock summer-timeone-off,clock timezone, display clock.

Example # For the summer time in abc2 between 06:00:00 on 08/01/2007 and 06:00:00 on 09/01/2007 and from 06:00:00 08/01 to 06:00:00 on 09/01 each year after 2007, set the system clock ahead one hour.

<Sysname> clock summer-time abc2 repeating 06:00:00 08/01/2007 06:00

:00 09/01/2007 01:00:00

clock timezone

Syntax clock timezone zone-name{ add minus } zone-offset

undo clock timezone

View User view

Parameter zone-name: Time zone name, a string of 1 to 32 characters. It is case sensitive.

add: Positive offset to universal time coordinated (UTC) time.

minus: Negative offset to UTC time.

zone-offset: In the format of HH/MM/SS (hours/minutes/seconds), where HH is hours in the range 0 to 23, MM is minutes in the range 0 to 59, and SS is seconds in the range 0 to 59. The zeros in the argument can be omitted except for indicating 0 hours.

Description Use the clock timezone command to set the local time zone.

Use the undo clock timezone command to restore the local time zone to the default UTC time zone.

By default, the local time zone is UTC zone.