Manual No. | NFT 2100 CCD Fixed Mount Barcode |
Scanner |
|
31. Redundant Decoding
The Number of Redundant Decodes determines how many times the scanner must decode a bar code and obtain the same value before it will transmit the data. For example, if the redundancy is set at three times, the scanner will not transmit data until it has completed three consecutive, identical “good reads”. In the case of a poor label which generates an intermediate “no decode” within a sequence of four scans where three of the four have resulted in “good reads”, the scanner will transmit the data after the fourth scan. In other words, a “no decode” does not restart the sequence.
Computer | Function | |
Command | /Description | |
(ZZ) | START/END | |
Programming Menu | ||
| ||
|
| |
X2 | Read bar code three times | |
|
| |
X3 | Read bar code four times | |
|
|
32. Transmitting Error Indications
Computer | Function | |
Command | /Description | |
|
| |
(ZZ) | START/END | |
Programming Menu | ||
| ||
|
| |
WD | Disable ACK/NAK response to | |
sent command | ||
| ||
|
| |
WC | Enable OK=ACK, ERROR=NAK, | |
response to sent command | ||
| ||
|
|
Bar Code
Command
[[
Y3
Y!
Bar Code
Command
[[
XE XD
%
%
Page 62
