Opticon NFT 2100 Z2 Z3 Z Z5 Z6 Z7 Z8 Z9 Z ZM Z1 ZN, Scanner Timeout Trigger Enabled Mode only

Manual No. 25-ULNFT2100-01; Mar, 2005	NFT 2100 CCD Fixed Mount Barcode
Scanner

28. Scanner Timeout (Trigger Enabled Mode only)

These commands, which are only applicable in the Trigger Enabled mode, establish the time-out period after the trigger pulse is received. In Single Read Mode, the time out is terminated upon a good read. In Multiple Read and Continuous Read Modes the time out period is restarted after any good read.

Computer	Function
Command	/Description
(ZZ)	START/END
	Programming Menu
Y1	1 Second after triggering
Y2	2 Seconds after triggering
Y3	3 Seconds after triggering
Y4	4 Seconds after triggering
Y5	5 Seconds after triggering
Y6	6 Seconds after triggering
Y7	7 Seconds after triggering
Y8	8 Seconds after triggering
Y9	9 Seconds after triggering
YL	Read time x 10
	On time follows the Hardware
Y0	trigger active time. Can be
	terminated by sending the Y
	command
YM	Stays ON indefinitely after
	triggering. Must be terminated
	by sending the Y commands.

Bar Code

Command

[[

Z2

Z3

Z!

Z5

Z6

Z7

Z8

Z9

Z:

ZM Z1

ZN

%

Page 59