3Com MSR 50, MSR 30 156, Configuration File Management Commands, Backup startup-configuration

2361

156

CONFIGURATION FILE MANAGEMENT

COMMANDS

backup startup-configuration

Syntax backup startup-configuration to dest-addr[dest-filename]

View User view

Parameter dest-addr: IP address or name of a TFTP server. The address cannot be an IPv6 address.

dest-filename: Target filename used to save the next startup configuration file on the server.

Description Use the backup startup-configurationcommand to backup the startup configuration file (for next startup) using a filename you specify. If you do not specify this filename, the original filename will be used.

■With a device that supports main/backup function, this command only backups the main configuration file for next startup.

■With a device that does not support main/backup function, this command backups the configuration file for next startup.

Presently, the device uses TFTP to implement backup operation.

Example # Backup the configuration file for next startup on the TFTP server with IP address 2.2..2.2, using the filename config.cfg.

<Sysname> backup startup-configuration to 2.2.2.2 config.cfg

Backup next startup-configuration file to 2.2.2.2, please wait...

finished!

<Sysname>

display saved-configuration

Syntax display saved-configuration [ by-linenum ]

View Any view