193

<Sysname> system-view

[Sysname] interface serial 1/0

[Sysname-Serial1/0] country-code china

crc

Syntax crc { 16 32 none }

undo crc

View Synchronous serial interface view

Parameter 16: Specifies 16-bit CRC. 32: Specifies 32-bit CRC. none: Disables CRC.

Description Use the crc command to set the CRC mode.

Use the undo crc command to restore the default.

By default, 16-bit CRC is adopted.

These two commands are not available to sub-serial interfaces and synchronous/asynchronous serial interfaces operating as asynchronous interfaces.

Example # Configure to adopt 32-bit CRC.

<Sysname> system-view

[Sysname] interface serial 0/0/0

[Sysname-Serial0/0/0] crc 32

detect

Syntax

1Asynchronous serial interface detect dsr-dtr

undo detect dsr-dtr

2Synchronous serial interface detect { dcd dsr-dtr} undo detect { dcd dsr-dtr}

View Synchronous serial interface view, asynchronous serial interface view

Page 193
Image 193
3Com MSR 50, MSR 30 Detect, Syntax crc 16 32 none Undo crc, Example # Configure to adopt 32-bit CRC, Undo detect dsr-dtr