589

Generally, as for the BRI interface adopting the ISDN NI protocol, you need to negotiate or initialize SPID before originate a call. During negotiation, SPCS may send multiple SPIDs and carry the service types supported by the SPID, therefore, the router needs to choose a proper SPID according to the local service type.

This command can only be applied on the BRI interface adopting NI protocol.

Example # Set the service type supported by BRI interface to data and voice.

<Sysname> system-view [Sysname] interface bri 1/0 [Sysname-Bri1/0] isdn spid service data

[Sysname-Bri1/0] isdn spid service speech

isdn spid resend

Syntax isdn spid resend times

undo isdn spid resend

View ISDN BRI interface view

Parameter times: The number of INFORMATION message retransmission attempts with an integer in the range of 1 to 255 times, which defaults to 1.

Description Use the isdn spid resend command to set the number of INFORMATION message retransmission attempts for SPID negotiation or initialization on an NI-compliant BRI interface.

Use the undo isdn spid resend command to restore the default number of

INFORMATION message retransmission attempts on the interface.

On a BRI interface compliant with the ISDN protocol in North America, calls can be placed only after the SPID negotiation or initialization is finished. The timer TSPID is started when the terminal originates a negotiation or initialization request by sending the INFORMATION message. If the terminal does not receive any response upon the expiration of TSPID, it will retransmit the INFORMAITON message. You can use this command to modify the number of INFORMATION message retransmission attempts.

This command applies only on NI-compliant BRI interfaces.

Example # Set the allowed number of INFORMATION retransmission attempts to five.

<Sysname> system-view

[Sysname] interface bri 1/0

[Sysname-Bri1/0] isdn spid resend 5

isdn spid1

Syntax isdn spid1 spid [ LDN ]

Page 589
Image 589
3Com MSR 50 Isdn spid resend, Isdn spid1, Syntax isdn spid resend times Undo isdn spid resend, Syntax isdn spid1 spid LDN