3Com MSR 50, MSR 30 manual Ftp client source, Undo ftp client source

2379

	interface interface-typeinterface-number: Specifies the source interface by its
	type and number. The primary IP address configured on this interface is the source
	address of the transmitted packets. If no primary IP address is configured on the
	source interface, the connection fails.
	ip source-ip-address:The source IP address of the current FTP client. This source
	address must be the one that has been configured on the device.
Description	Use the ftp command to log onto the remote FTP server and enter FTP client view.
	Note that:
	■ This command applies to IPv4 network.
	■ If you use this command without specifying any parameters, you will simply
	enter the FTP client view without logging onto the FTP server.
	■ If you specify the parameter, you will be asked to enter the username and
	password for accessing the FTP server.
	■ The priority of the source address specified with this command is higher than
	that with the ftp client source command. If you specify the source address
	with the ftp client source command first and then with the ftp command, the
	source address specified with the ftp command is used to communicate with
	the FTP server.
Related command:	ftp client source.
Example	# Log from the current device Sysname1 onto the device Sysname2 with the IP
	address of 192.168.0.211. The source IP address of the packets sent is
	192.168.0.212.
	<Sysname1> ftp 192.168.0.211 source ip 192.168.0.212
	Trying 192.168.0.211 ...
	Press CTRL+K to abort
	Connected to 192.168.0.211.
	220 FTP Server ready
	User(192.168.0.211:(none)):abc
	331 Password required for abc
	Password:
	230 Login OK
	[ftp]

ftp client source

Syntax	ftp client source { interface interface-type interface-number ip source-ip-address }
	undo ftp client source
View	System view
Parameter	interface interface-type interface-number: Source interface for the FTP
	connection, including interface type and interface number. The primary IP address
	configured on the source interface is the source IP address of the packets sent by