3Com MSR 30 Pvc-group, Pvc max-number, Related command ip-precedence,pvc, View ATM interface view

308CHAPTER 19: ATM CONFIGURATION COMMANDS

pvc-group

Syntax pvc-group{ pvc-name [ vpi/vci ] vpi/vci }

undo pvc-group{ pvc-name [ vpi/vci ] vpi/vci }

View ATM interface view

Parameter pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not case-sensitive. The name cannot be the same as a valid VPI/VCI pair value. For example, the name 1/20 is not allowed. The PVC corresponding to pvc-namemust have already been created.

vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0 to 255. VCI is short for virtual channel identifier; its value range varies by interface type. Normally, values from 0 to 31 are reserved for special purpose, you are not recommended to use them. For details on the value range, refer to “VCI range for each type of ATM interface” on page 307.

Description Use the pvc-groupcommand to create a PVC group or enter PVC group view.

Use the undo pvc-groupcommand to delete the specified PVC-Group.

In creating a PVC-Group, the pvc-nameargument or the vpi/vci argument defines the primary PVC of the PVC-Group.

Before creating a PVC group, make sure the corresponding PVC exists.

The encapsulation command and the oam-related commands are not applicable to secondary PVCs. The configurations corresponding to these commands on the primary PVC of a PVC group apply to all the secondary PVCs in the PVC group.

Related command: ip-precedence,pvc.

Example # Create a PVC group named “aa”, with the primary PVC being the PVC with the VPI/VCI value of 1/32.

<Sysname> system-view [Sysname] interface atm 1/0 [Sysname-Atm1/0] pvc aa 1/32

[Sysname-atm-pvc-group-Atm1/0-1/32-aa] quit [Sysname-Atm1/0] pvc-group aa 1/32

pvc max-number

Syntax pvc max-number max-number

undo pvc max-number

View ATM interface view