3Com MSR 30, MSR 50 manual Remark dot1p, Remark dscp, Syntax remark dot1p 8021p Undo remark dot1p

1796 CHAPTER 109: DEFINING TRAFFIC BEHAVIOR COMMANDS

remark dot1p

Syntax remark dot1p 8021p

undo remark dot1p

View Traffic behavior view

Parameters 8021p: Remarked 802.1p priority value, in the range 0 to 7.

Description Use the remark dot1p command to configure the 802.1p priority value of the remarked packet.

Use the undo remark dot1p command to remove the 802.1p priority value from the remarked packet.

By default, no 802.1p priority is marked.

Related commands: qos policy, traffic behavior, classifier behavior.

Examples # Set the 802.1p priority value of the remarked packet to 2.

<Sysname> system-view

[Sysname] traffic behavior database

[Sysname-behavior-database] remark dot1p 2

remark dscp

Syntax remark dscp dscp-value

undo remark dscp

View Traffic behavior view

Parameters dscp-value: DSCP value, in the range 0 to 63, which can be any of these keywords listed in Table 479:

Table 479 DSCP keywords and values

Keyword	DSCP value (binary)	DSCP value (decimal)
default	000000	0
af11	001010	10
af12	001100	12
af13	001110	14
af21	010010	18
af22	010100	20
af23	010110	22
af31	011010	26