Schwinn 420 manual Assembly, Install Rear Stabilizer andTransport Handle

Assembly

Step 1: Install Rear Stabilizer andTransport Handle

Parts

•#5 - Rear Stabilizer (Qty. 1)

•#17 - Running Rail (Qty. 2)

•#18 - Transport Handle (Qty. 1)

•#22 - Threaded Foot Pad (Qty. 2)

•#23 - Foot Adjust Nut (Qty. 2)

1-1Attach two Running Rails to Rear Stabilizer with the hardware shown. Do not tighten.

1-2Attach the Transport Handle to each Running Rail with 2 Foot Adjust Nuts and 2 Foot Pads.

1-3Fully tighten all hardware.

Hardware

•#24 - M8 Flat Washer (Qty. 8)

•#25 - M8 Lock Washer (Qty. 8)

•#29 - M8x15 Hex Screw (Qty. 8)

Tools

• Hex Key

5

17

29

24

25

23 18

22

8

Assembly Manual