Assembly

Step 3: Install Console Mast and Water Bottle Holder

Parts

Main Unit (from Step 2)

#4 - Water Bottle Holder

(Two parts: (4a) outer ring, (4b) - base)

#6 - Console Mast (Qty. 1)

#21 - Mast Boot (Qty. 1)

Hardware

#24 - M8 Flat Washer (Qty. 5)

#25 - M8 Lock Washer (Qty. 5)

#26 - M5x25 Phillips Head Screw (Qty. 2)

#29 - M8x15 Hex Screw (Qty. 5)

3-1Put the Console Mast into the Mast Boot.

3-2Connect the wire harness (W1) from the Main Unit to the wire harness (W2) in the Console Mast.

3-3Move the Console Mast down on the Main Unit. Secure the Console Mast with the hardware shown.

NOTICE: Do not pinch the wires when putting the Console Mast on the Main Unit.

3-4Move the Mast Boot down to the Main Unit.

3-5Attach the Water Bottle Holder to the Console Mast with the hardware shown.

Tools

• Phillips Head Screwdriver

 

6

 

4a

 

24

4b

25

29

 

26

W2

 

 

21

 

W1

10

Assembly Manual

Page 10
Image 10
Schwinn 420 manual Install Console Mast and Water Bottle Holder