Schwinn 420 manual Install Moving Handlebars

Assembly

Step 8: Install Moving Handlebars

Parts

•Main Unit (from Step 7)

•#9 - Upper Left Handlebar (Qty. 1)

•#10 - Upper Right Handlebar (Qty. 1)

Hardware

•#24 - M8 Flat Washer (Qty. 8)

•#25 - M8 Lock Washer (Qty. 8)

•#30 - M8x20 Hex Screw (Qty. 8)

Do steps 8-1 thru 8-2 on one side and then again on the other side.

8-1Put the Upper Right Handlebar into the Lower Right Handlebar (Figure 8). Make sure that the Upper Handlebar curves toward the back of the machine (Figure 8A).

8-2Attach with the hardware shown.

Tools

• Hex Key

Figure 8

9

10

30

25

24

Figure 8a

15

Assembly Manual