Schwinn 420 manual Install Front Stabilizer

Assembly

Step 2: Install Front Stabilizer

Parts

•Rear Stabilizer assembly (from Step 1)

•#1 - Main Frame (Qty. 1)

•#16 - Front Stabilizer (Qty. 1)

Hardware

•#24 - M8 Flat Washer (Qty. 8)

•#25 - M8 Lock Washer (Qty. 8)

•#30 - M8x20 Hex Screw (Qty. 8)

2-1Attach the Main Frame to the Front Stabilizer with the hardware shown.

2-2Attach the Main Frame to the Rear Stabilizer with the hardware shown.

2-3Adjust the 6 Foot Pads (A) under the Stabilizers and the Transport Handle until they just touch the floor (see Figure 2a). First, twist the Threaded Foot Pad out and then lock with the Foot Adjust Nut to keep machine stable.

Tools

• Hex Key	1
Figure 2

30

25 24

16 30 25 24

Figure 2a

A

9

Assembly Manual