• Place new chain in groove of guide bar and around sprocket. Make

 

sure saw teeth are facing correct direction by matching arrow on

 

chain with graphic on housing shown here.

•

Rotate the screw in the front of the housing clockwise to increase

 

the chain tension as in Figure 3.

 

• Replace sprocket cover, bar clamp, and allen head screws.

• Follow instructions for adjusting the chain tension.

Adjusting Chain Tension

 

• With the saw still on a firm surface check the chain tension. The

 

tension is correct when the chain snaps back after being pulled

 

1/8 in. (3mm) away from the chain

 

 

bar with light force from the middle

4

 

finger and thumb as shown in

 

 

figure 4. There should be no “sag”

 

 

between the guide bar and the chain

 

 

on the underside as shown in

 

•

figure 5.

 

To adjust saw chain tension, loosen

 

•

allen head screws.

5

Rotate the screw in the front of the

 

 

housing using the flat screwdriver end

 

•

of the wrench as shown in figure 3.

 

Do not over-tension the chain as this will

 

lead to excessive wear and will reduce

 

 

the life of the bar and chain.

 

 

Overtensioning also reduces the amount of cuts you will get per

 

battery charge.

 

• Once chain tension is correct, tighten allen head screws to clamp

•

bar.

 

When the chain is new check the tension frequently (after

 

disconnecting battery) during the first 2 hours of use as a new chain

 

stretches slightly.

 

Chain Oiling

 

• A high quality bar and chain oil or

 

SAE30 weight motor oil should be

6

used for chain and bar lubrication. The

 

use of a vegetable based bar and chain

 

oil is recommended when pruning

 

trees. Mineral oil is not recommended

 

because it may harm trees. Never use

 

waste oil or very thick oil. These may

 

damage your chain saw.

 

• Lubricate the whole chain evenly

 

before each use as shown in figure 6.

 

Also lubricate the chain whenever

 

replacing a fully discharged battery with

 

a fully charged one.

 

Transporting Pole Saw

7

• Always remove the battery pack from the

 

handle (figure 7) and cover the chain with the

scabbard (figure 8) when transporting the

Pole Saw. See page 5 for additional

8

information on transporting the battery.

 

9

Page 8 Page 10
Page 9
Image 9
Black & Decker NPP2018 instruction manual Adjusting Chain Tension, Chain Oiling, Transporting Pole Saw, Stretches slightly
Page 8 Page 10

NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents