Assembly

 

Joining Saw Head Module to 18V Handle Module

WARNING: Sharp moving blade. To prevent accidental

operation, insure that battery is disconnected from the handle

and that the protective scabbard is in place on the chain before

performing the following operations. Failure to do this could result

in serious personal injury.

 

The three modules which make up the 18V Pole Saw are keyed to

insure correct assembly. If a module does not smoothly attach to

another do not force fit.

 

Combining the handle module (A) to the saw head module (C)

creates a pole saw that is approximately 6 foot in length as shown in

figure 9. 9

 

Toattach the handle module to the saw head module:

1. Align the groove on the outside of the coupling end of the handle

module (A) with the tongue on the

10

inside of the coupling end of the saw

 

head module (C). See figure 10. Push

 

the two sections completely together.

Groove

2. Slide the threaded sleeve (6) figure 11

on the saw head module down as far as

 

possible and rotate the sleeve clockwise

11

until it stops and completely covers the

 

orange threads as shown in figure 12.

 

WARNING: Always check to make

 

sure that the sleeve is completely

 

threaded on and that the orange

 

threads are no longer visible. Not

12

threading the sleeve completely on

 

could result in the modules becoming

 

disconnected creating a hazardous

 

condition. Periodically check the

 

connections to insure that no orange

 

threads are visible.

 

Joining Center Extension to Saw Head Module and Handle Module

Adding the extension (B) to the handle module (A) and saw head module (C) creates a Pole Saw that is approximately 9 foot in length as shown in figure 13.

13

 

To attach the middle module to the handle module and saw head

module:

14

1. Align the groove on the outside of the

 

coupling end of the handle module (A)

 

with the tongue on the inside of the

 

coupling end of the center extension (B). Groove

See figure 14. Push the two sections

 

completely together.

15

2. Slide the threaded sleeve (6) (figure

 

15) on the center extension down as far

 

as possible and rotate the sleeve

 

clockwise until it stops and completely

 

covers the orange threads as shown in

 

figure 16.

16

3. Repeat steps 1 and 2 above to attach

 

the saw head module to the center

 

extension.

 

WARNING: Always check to make

 

sure that the sleeve is completely

 

threaded on and that the orange threads are no longer visible.

Not threading the sleeve completely on could result in the modules

becoming disconnected creating a hazardous condition.

Periodically check the connections to insure that no orange threads

are visible.

 

10

Page 9 Page 11
Page 10
Image 10
Black & Decker NPP2018 Joining Saw Head Module to 18V Handle Module, Toattach the handle module to the saw head module
Page 9 Page 11

NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents