If you try to cut off thick branches from the bottom, the branch may close in and pinch the saw chain 24 in the cut. If you try to cut off thick branches from the top, without a shallow undercut, the branch may splinter figure 24.

Do not force Pole Saw. The motor will overload and can burn out. It will do the job better and safer at the rate for which it was intended.

3. Remove Pole Saw from cut while

it is running at full speed. Stop Pole Saw by releasing trigger. Make sure chain has stopped before setting Pole Saw down.

Saw chain sharpness

The cutters will dull immediately if they touch the ground or a nail while cutting.

Saw chain tension

This should be done regularly. Refer to page 8 “Adjusting Chain Tension”.

Pole Saw Maintenance Section

Regular maintenance ensures a long effective life for the tool. After every 10 minutes of use be sure to remove the battery (be aware the chain and bar can be hot!) check the bar and chain for correct tension and lubricate per pole saw instruction manual. Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: Toassure product SAFETY and RELIABILITY,repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Accessories

 

 

 

Replacement chain and bar are available from your nearest Black &

Decker service center.

 

 

Replacement chain # 623382-00, Replacement bar # 623381-00

The use of accessories not recommended in this manual may be

hazardous.

Troubleshooting Section

If your Pole Saw does not operate correctly check the following:

Problem

Possible Cause

Possible Solution

Toolwill not

Battery not

Check battery installation.

 

start.

installed properly.

Check battery charging

 

 

Battery not

 

 

charged.

 

requirements.

 

 

Lock-out button not •

Pull back on lock

 

 

actuated.

button/actuate trigger.

 

 

Pole connections

Refer to instruction manual

 

 

 

not properly

 

for pole connections.

 

 

 

tightened.

Insert battery into charger

Unit will not

Battery not

 

charge.

 

inserted into

 

until green LED appears.

 

 

charger.

 

Charge up to 9 hours if

 

 

 

 

 

battery totally drained.

Bar / chain

Chain too tight.

Refer to section on

 

overheated.

Lubrication

adjusting chain tension.

 

 

Refer to sections for chain

 

 

 

needed.

 

oiling application.

Chain is

Chain tension set

• Refer to section for chain

 

loose.

 

incorrectly.

 

tensioning.

13

Page 13
Image 13
Black & Decker NPP2018 instruction manual Accessories, Troubleshooting Section, Saw chain sharpness, Saw chain tension

NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.