Omron Healthcare HEM-711 instruction manual Troubleshooting, Error Indicator Cause Correction

HOW TO USE THE OPTIONAL AC ADAPTER

(ACCESSORY ITEM SOLD SEPARATELY)

To avoid potential damage to the monitor, use only the exclusive AC adapter (Model HEM-ADPT1) which can be purchased from:

Omron Healthcare, Inc.

300 Lakeview Parkway

Vernon Hills, IL 60061

Toll Free Phone #: 1-800-634-4350

To connect AC adapter

1. Insert the AC adapter plug Plug into the jack on the side of the

monitor.

2. Insert the AC adapter plug

into a 120V AC outlet (50 - 60

cycles).Jack

Option AC Adapter

To remove the AC adapter

To remove the AC adapter, disconnect the adapter plug from the AC outlet first and then disconnect the cord from the monitor’s jack.

NOTE: The monitor is designed not to draw power from the batteries when the AC adapter is in use.

TROUBLESHOOTING

Error Indicator	Cause	Correction
	Cuff under-inflated.	Turn monitor off, wait 2-3 minutes
		and take another measurement.
		Repeat steps listed under "How to
		Take a Reading." If "EE" is displayed
		again, take another measurement
		by pressing and holding the START
	Movement during	button as instruction page 12 under
		"How to Take a Reading", instructions
	measurement.	for special conditions.

Cuff over-inflated (more than	Turn the monitor off, carefully read
	and repeat steps listed under "How
300 mmHg).
	to Take a Reading."

Battery voltage is excessively	Replace all four "AA" batteries with
low.	new batteries.

Problem caused by abnormal	Contact OMRON Customer Service
memory function.	Toll Free 1-800-634-4350

If you continue to have difficulty obtaining a reading, call

OMRON HEALTHCARE CUSTOMER SERVICE TOLL FREE 1-800-634-4350.

Please tell the representative you have an OMRON Model HEM-711.

14 15