3Com MSR 30, MSR 50 manual Maximum load-balancingOSPFv3 view, Process

1298 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDS

	# Configure OSPFv3 process 100 to redistribute the routes found by OSPFv3
	process 160.
	<Sysname> system-view
	[Sysname] ospfv3 100
	[Sysname-ospfv3-100] import-route ospfv3 160
log-peer-change
Syntax	log-peer-change
	undo log-peer-change
View	OSPFv3 view
Parameters	None
Description	Use the log-peer-changecommand to enable the logging on neighbor state
	changes.
	Use the undo maximum load-balancingcommand to disable the logging.
	With this feature enabled, information about neighbor state changes of the
	current OSPFv3 process will display on the configuration terminal.
Examples	# Disable the logging on neighbor state changes of OSPFv3 process 100.
	<Sysname> system-view
	[Sysname] ospfv3 100
	[Sysname-ospfv3-100] undo log-peer-change

maximum load-balancing(OSPFv3 view)

Syntax maximum load-balancing maximum

undo maximum load-balancing

View OSPFv3 view

Parameters maximum: Maximum number of load-balanced routes, in the range 1 to 8. The argument being set to 1 means no load balancing is available.

Description Use the maximum load-balancingcommand to configure the maximum number of load-balanced routes.

Use the undo maximum load-balancingcommand to restore the default.

Examples # Configure the maximum load-balanced routes as 6.