3Com MSR 50 Tftp client source, Related command tftp client source, Packets from the Tftp client

2393

Description Use the tftp command to upload files from the local device to a TFTP server or download files from the TFTP server to the local device.

■If no destination file name is specified, the saved file uses the source file name.

■The priority of the source address specified with this command is higher than that with the tftp client source command. If you use the tftp client source command to specify the source address first and then with the tftp command, the latter one is adopted.

This command applies to IPv4 network.

Related command: tftp client source.

Example # Download the config.cfg file from the TFTP server with the IP address of 192.168.0.98 and save it as config.bak. Specify the source IP address to be 192.168.0.92.

<Sysname> tftp		192.168.0.98 get	config.cfg config.bak source ip 192.168.0.92
.
File will be		transferred in binary		mode
Downloading file from remote tftp server, please wait...<HardReturn
TFTP:	2143 bytes received		in 0	second(s)

File downloaded successfully.

# Upload the config.cfg file from the storage device to the default path of the TFTP server with the IP address of 192.168.0.98 and save it as config.bak. Specify the source IP interface to be Ethernet 1/0.

<Sysname> tftp		192.168.0.98 put config.cfg config.bak source interface Ether
net 1/0
.
File will be		transferred in	binary mode
Sending file		to remote tftp	server. Please wait... <HardReturn
TFTP:	2143 bytes sent in 0 second(s).
File uploaded successfully.

tftp client source

Syntax	tftp client source { interface interface-type interface-number ip source-ip-address }
	undo tftp client source
View	System view
Parameter	interface interface-typeinterface-number: Specifies the source interface by its
	type and number. The primary IP address configured on the source interface is the
	source IP address of the packets sent by FTP. If no primary IP address is configured
	on the source interface, the transmission fails.
	ip source-ip-address:The source IP address of the TFTP connection. It must be an
	IP address configured on the device.
Description	Use the tftp client source command to configure the source address of the TFTP
	packets from the TFTP client.