3Com MSR 50, MSR 30 Ftp timeout, Ftp update, Syntax ftp timeout minute Undo ftp timeout, 2371

2371

Use the undo ftp server command to disable the FTP server.

By default, the FTP server is disabled to prevent attacks.

Example # Disable the FTP server.

<Sysname> system-view

[Sysname] undo ftp server

% Close FTP server

ftp timeout

Syntax ftp timeout minute

undo ftp timeout

View System view

Parameter minute: Idle-timeout timer in minutes, in the range 1 to 35791. The default is 30 minutes.

Description Use the ftp timeout command to set the idle-timeout timer.

Use the undo ftp timeout command to restore the default.

After you log onto the FTP server, you set up an FTP connection. When the connection is disrupted, the FTP server, if not notified, cannot realize that and maintains the connection all the same. To address this problem, you can set an idle-timeout timer to have the FTP server disconnected if no information is received or/and transmitted before the timer expires.

Example # Set the idle-timeout timer to 36 minutes.

<Sysname> system-view

[Sysname] ftp timeout 36

ftp update

Syntax ftp update { fast normal }

undo ftp update

View System view

Parameter fast: Fast update.

normal: Normal update.

Description Use the ftp update command to set the file update mode that the FTP server uses while receiving data.