3Com MSR 50, MSR 30 manual Nlp-on, E1 voice, T, #, and * are not supported currently, Undo nlp-on

2601

n

Example

are used to match the actual numbers in the received call packets to complete the calls.

When configuring a POTS entity, use the match-templatecommand to define the number template to be bound to the local voice entity. When configuring a VoIP entity, use the match-templatecommand to define the number template on the called side.

In E1 voice, “T”, “#”, and “*” are not supported currently.

# Specify 5557922 as a telephone number of voice entity 10.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 10 pots

[Sysname-voice-dial-entity10] match-template 5557922

# Configure a match template for VoIP entity 10.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 010 voip

[Sysname-voice-dial-entity10] match-template 5557922

nlp-on

Syntax	nlp-on
	undo nlp-on
View	Voice subscriber line view
Parameter	None
Description	Use the nlp-oncommand to enable the EC nonlinear processing function on a
	voice interface.
	Use the undo nlp-oncommand to disable the function.
	By default, the EC nonlinear processing function is enabled.
n	■ This command takes effect only after the echo-canceller enable command is
	configured.
	■ Currently, only digital voice subscriber lines support the undo nlp-on
	command, but analog voice subscriber lines do not.
Example	# Disable the EC nonlinear processing function on voice interface.
	<Sysname> system-view
	[Sysname] voice-setup