UC374BH(MPH6990) OM ENG 6/5/02 8:57 AM Page 44
The Answering Machine (continued)
4 You may select a command from the following chart:
Command | Function |
#then 1 Repeating a Message
#then 2 Playing Incoming Messages
#then 3 Skipping a Message
#then 4 Deleting a Message
#then 5 Stop Operation
#then 6 Answering System On
#then 7 Memo Record/Stop*
#then 8 Greeting Message Record/Stop*
#then 9 Answer System Off
#then 0 Help Guidance
*For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again.
5 You hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.
6 When you are finished, hang up to exit the system. The answering system automatically returns to standby.
Notes
•You must enter a command within 15 seconds of entering the command waiting mode or the answering system automatically hangs up and returns to standby.
•The system will only playback messages for four minutes and returns to command waiting mode. To continue playing your messages, press # then 2 again within 15 seconds.
44
