Setting the ring time | Memorex MPH6990 instruction

“Security code” and the current PIN code is announced as it is displayed on the base.

2 Press SKIP or REPEAT until the desired number appears.

3 Press SET/RINGER to select the PIN code. You hear a tone and the system announces “Security code” and the new PIN code.

The Answering Machine (continued)

Setting a Personal Security Code (PIN)

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps:

Press MENU twice.

1

UC374BH(MPH6990) OM ENG

6/5/02 8:57 AM Page 35

Note The PIN code is set to “80” when you purchase the phone.

Setting the ring time

The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to

answer after two, four, or six rings. Setting (Toll Saver), the answering system picks up after two rings if you have new messages, and after four rings if there are none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid billing charges.

1

2

Press MENU three times.

You hear “Ring time” and the current ring time ([ ] 2, [ ] 4, [ ] 6, [ ] Toll saver), and it is displayed on the base.

Press SKIP or REPEAT until the desired ring time appears.

3 Press SET/RINGER to select the new ring time. You hear a tone and the system announces “Ring time” and the new ring time.

35

Image 36

Memorex MPH6990 owner manual Setting the ring time

Contents

MPH6990 Features Introduction Control and Functions Table of Contents Important safety instructions Additional battery safety precautions Cordless telephone privacy Telephone Line Problems Important electrical considerationsFCC Wants You To Know Range Radio Interference More Than One Cordless Telephone Read This First 10 to13 to 33 to Checking the package contents Step Setting up the base unit Choose the best location Connect the base unit Surge Protectors Choose the dialing mode Tip Preparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solvents Dialing from talk mode Making CallsDialing from standby Redialing Instant Talk when ringing Any key when ringingReceiving Calls Receiving a call Handset Ringer and Earpiece Volume Using the Page FeatureTo locate the handset while it’s off the base Memory Storing Storing phone numbers and names After about 2 seconds, Memory Store is displayed Steps for entering names and special characters If you make a mistake while entering a nameNumber of times key is pressed Memory Dialing Making calls with memory dialingDialing from standby Dialing from talk mode Display a Programmed NumberProgram name Program number Memory Editing Editing a stored name and/or phone number Memory Erasing Erasing a stored name and phone number Speed Dial Feature Storing and Editing the Speed DialMaking calls with speed dialing Deleting the Speed Dial Caller ID Features Setting Caller ID options/LanguageCaller ID When the telephone rings Long Distance Calls and Area Code Setting/Cancellation Viewing the Caller ID message list When the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID message Using the Caller ID list Storing Caller ID messages in MemoryCalling a party from the Caller ID list Using Caller ID with Call Waiting service Answering Machine Turning the Answering System On/Off Setting up Your Answering System Using the Menu Mode Setting the Time Setting the ring time Announce only feature Selecting the message record time Setting the Message Alert tone Selecting the LanguageTurning the Message Alert tone Off by pressing any key Setting the base ringer volume Adjusting the speaker volume level Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Choosing between the two outgoing messages Using Your Answering System Playing your messages Repeating a Message Skipping a message Deleting a messages Voice memo Remote access away from home Recording a conversation Command Function Turn on the answering system remotely Additional Information Changing the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Maintenance Battery replacement and handlingPower Failure Ni-Cd Troubleshooting Symptom Suggestion For Parts and ACCESSORIES, Contact FOX INT’L AT Terminal Equipment Radio Equipment Index I, G Limited WARRANTY-CORDLESS Telephones Memo Memo UCZZ01374DZ