UC374BH(MPH6990) OM ENG 6/5/02 8:57 AM Page 46

Additional Information

Changing the digital security code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.

The first time you charge your handset, the security code is automatically set. (See page 8.) In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code as follows.

1 Remove the handset from the base unit. Press and hold PAGE/FIND.

2 While the handset is emitting the paging sound, place the handset on the base unit holding PAGE/FIND. The paging tone stops.

Leave the handset on the base for more than 3 seconds.

A random, new security code is set.

Note

If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically next time the battery pack is charged.

46

Page 47
Image 47
Memorex MPH6990 owner manual Additional Information, Changing the digital security code