UC374BH(MPH6990) OM ENG 6/5/02 8:56 AM Page 17

Handset Ringer and Earpiece Volume

Handset ringer tone

In the standby mode, press ▲ or ▼.

Each time ▲ or ▼ is pressed, the ringer tone setting changes and the selected ringer tone sounds for 2 seconds.

Handset earpiece volume

During a telephone call, pressing ▲ or ▼ will change the earpiece volume of the handset. This setting will remain in effect after the telephone call has ended.

When you press ▲ in Maximum mode or press ▼ in Low mode, an error tone sounds.

Ringer Mute

You can temporarily mute the handset ringer tone. When the handset is off the base and the phone is ringing, press OFF. The ringer tone will return to normal starting with the next incoming call.

Using the Page Feature

To locate the handset (while it’s off the base)

1 Press PAGE/FIND on the base.

2 The handset beeps for 60 seconds.

3 Press any key on the handset or PAGE/FIND on the base, or return the handset to the base to cancel the page.

17

Page 18
Image 18
Memorex MPH6990 Handset Ringer and Earpiece Volume, Using the Page Feature, To locate the handset while it’s off the base