UC374BH(MPH6990) OM ENG 6/5/02 8:57 AM Page 39
The Answering Machine (continued)
Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset message or your own greeting.
▼ Preset message
The following message is prerecorded:
“Hello, no one is available to take your call. Please leave a message after the tone.”
Note See “Selecting the message record time”, on page 36 for how to set the announce only feature.
▼ Recording a personal outgoing message (Greeting)
1 Press and hold OGM.
You hear the announcement “Record greeting” and a tone. The [ ] flashes on the message counter.
2 Start recording your message. You have 30 seconds, and the message counter starts to count down [ 
] to [ 
] every second.
3 When you are finished recording your greeting, press OGM or PLAY/STOP. You hear a tone after your greeting plays back on the base speaker.
Notes
•You can record a greeting up to 30 seconds long.
•Position yourself as near to the base as possible and speak clearly when recording your outgoing message.
▼Choosing between the two outgoing messages
Press OGM. Then press OGM again when the outgoing message is played. This switches between the prerecorded greeting or the personal greeting. After finishing playing back the message, a tone is heard.
Note To delete the personal Greeting, press DELETE during the announcement and the system announces “Greeting has been deleted”.
39
