3Com MSR 30, MSR 50 manual Reset acl counter, Rule in basic IPv4 ACL view, View Basic IPv4 ACL view

2092 CHAPTER 138: IPV4 ACL CONFIGURATION COMMANDS

Table 545 Description on the fields of the display acl command

Field	Description
rule 5 comment This rule is	The description of ACL rule 5 is "This rule is used in eth 1."
used in eth 1

reset acl counter

Syntax reset acl counter { acl-number all name acl-name}

View User view

Parameter acl-number: IPv4 ACL number in the range 2000 to 4999, where:

■2000 to 2999 for basic IPv4 ACLs

■3000 to 3999 for advanced IPv4 ACLs

■4000 to 4999 for Ethernet frame header ACLs

all: All IPv4 ACLs except for user-defined ACLs.

name acl-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters. It must start with an English letter and cannot be the English word of all to avoid confusion.

Description Use the reset acl counter command to clear statistics about specified or all IPv4 ACLs except for user-defined ACLs.

Example # Clear statistics about IPv4 ACL 2001.

<Sysname> reset acl counter 2001

# Clear statistics about IPv4 ACL flow.

<Sysname> reset acl counter name flow

rule (in basic IPv4 ACL view)

Syntax rule [ rule-id] { deny permit } [ fragment logging source { sour-addrsour-wildcardany } time-range time-namevpn-instance vpn-instance-name] *

undo rule rule-id[ fragment logging source time-range vpn-instance ] *

View Basic IPv4 ACL view

Parameter rule-id: Basic IPv4 ACL rule number in the range 0 to 65534. deny: Defines a deny statement to drop matched packets.

permit: Defines a permit statement to allow matched packets to pass.