3Com MSR 30, MSR 50 manual Portal server method, Reset portal connection statistics

2078 CHAPTER 135: PORTAL CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] portal server pts ip 192.168.0.111 key portal url http://1

92.168.0.111/portal

portal server method

Syntax portal server server-namemethod { direct layer3 redhcp } [ service-type

{normal plus } ]

undo portal

View Interface view

Parameter server-name: Name of the portal server, a case-sensitive string of 1 to 32 characters.

Method: Specifies an authentication method.

■direct: Direct authentication.

■layer3: Layer 3 authentication

■redhcp: Re-DHCP authentication.

service-type: Type of service. The default service type is normal.

■Normal: Normal portal authentication.

■Plus: Extended portal authentication.

Description Use the portal server command to enable portal authentication on the interface, and specify the portal server to be referenced, authentication mode and service type.

Use the undo portal command to disable portal authentication on the interface.

By default, portal authentication is disabled.

Note that the specified portal server must exist.

Related command: display portal server.

Example # Enable portal authentication on interface Ethernet 1/0, specifying the portal server as pts, setting the authentication mode to direct and the service type to normal.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] portal server pts method direct service-type normal

reset portal connection statistics

Syntax reset portal connection statistics { all interface interface-typeinterface-number}