1376 CHAPTER 89: MSDP CONFIGURATION COMMANDS

<Sysname> system-view [Sysname] msdp

[Sysname-msdp] peer 110.10.10.1 minimum-ttl 10

peer request-sa-enable

Syntax peer peer-addressrequest-sa-enable

undo peer peer-addressrequest-sa-enable

View Public instance MSDP view, VPN instance MSDP view

Parameter peer-address: MSDP peer address.

Description Use the peer request-sa-enablecommand to enable the device to send SA request messages.

Use the undo peer request-sa-enablecommand to disable the device from sending SA request messages.

By default, no SA request message is sent.

Note that before you can enable the device to send SA requests, you must disable the SA message cache mechanism.

Related command: cache-sa-enable.

Example # Disable the SA message cache mechanism in the public instance, and enable the router to send an SA request message to the MSDP peer 125.10.7.6 upon receiving a new Join message..

<Sysname> system-view [Sysname] msdp

[Sysname-msdp] undo cache-sa-enable

[Sysname-msdp] peer 125.10.7.6 request-sa-enable

peer sa-cache-maximum

Syntax peer peer-addresssa-cache-maximum sa-limit

undo peer peer-addresssa-cache-maximum

View Public instance MSDP view, VPN instance MSDP view

Parameter peer-address: MSDP peer address.

sa-limit: Maximum number of SA messages that the device can cache, in the range of 1 to 8,192.

Page 1376
Image 1376
3Com MSR 30, MSR 50 manual Peer request-sa-enable, Peer sa-cache-maximum