3Com MSR 50, MSR 30 manual Pim holdtime assert, Pim holdtime join-prune, 1415

1415

Related command: pim hello-optionlan-delay,hello-optionlan-delay (PIM view), and hello-optionoverride-interval (PIM view).

Example # Set the prune override interval to 2,000 milliseconds on Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim hello-option override-interval 2000

pim holdtime assert

Syntax pim holdtime assert interval

undo pim holdtime assert

View Interface view

Parameter interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.

Description Use the pim holdtime assert command to configure the assert timeout time on the current interface.

Use the undo pim holdtime assert command to restore the default setting.

By default, the assert timeout time is 180 seconds.

Related command: holdtime join-prune (PIM view), pim holdtime join-prune, and holdtime assert (PIM view).

Example # Set the assert timeout time to 100 seconds on Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim holdtime assert 100

pim holdtime join-prune

Syntax pim holdtime join-prune interval

undo pim holdtime join-prune

View Interface view

Parameter interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.

Description Use the pim holdtime join-prunecommand to configure the join/prune timeout time on the interface.