3Com MSR 30, MSR 50 Display ospf sham-link, Syntax display ospf process-id sham-link area area-id

1690 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS

Import VPN Targets : 4:4 5:5

Import Route Policy : poly-1

Description : This is vpn1

Maximum number of Routes : 500

Interfaces : Ethernet1/0

Table 458 Description on the fields of display ip vpn-instance instance-name

Field	Description
VPN-Instance Name and ID	Name and ID of the VPN instance
CreateTime	Time when the VPN instance was created
Up time	Duration of the VPN instance
Route Distinguisher	RD of the VPN instance
Export VPN Targets	Export target attribute of the VPN instance
Import VPN Targets	Import target attribute of the VPN instance
Import Route Policy	Import routing policy of the VPN instance
Description	Description of the VPN instance
Maximum number of Routes	Maximum number of routes of the VPN instance
Interfaces	Interface to which the VPN instance is bound

display ospf sham-link

Syntax display ospf [ process-id] sham-link [ area area-id]

View Any view

Parameter process-id: OSPF process ID, in the range 1 to 65535.

area-id: OSPF area ID. It can be an integer in the range 0 to 4294967295 or in the format of an IPv4 address.

Description Use the display ospf sham-linkcommand to display information about sham links.

With neither process ID nor area ID specified, the command displays information about all configured sham links.

Related command: sham-link.

Example # Display information about all OSPF sham links.

<Sysname> display ospf sham-link
	OSPF Process 100 with Router		ID 100.1.1.2
Sham Link:
Area	RouterId	Source-IP	Destination-IP	State Cost
0.0.0.1	100.1.1.2	3.3.3.3	5.5.5.5	P-2-P 10

Table 459 Description on the fields of the display ospf sham-link command

Field	Description
Area	OSPF area to which the sham link belongs