3Com MSR 50 manual Isis timer retransmit, Is-level, Related commands Examples Isis timer lsp, 1073

1073

n This command is not available in loopback interface view.

Examples # Configure the interval as 500 milliseconds for sending LSPs on interface serial 2/0.

<Sysname> system-view

[Sysname] interface serial2/0

[Sysname-Serial2/0] isis timer lsp 500

isis timer retransmit

Syntax isis timer retransmit seconds

undo isis timer retransmit

View Interface view

Parameters seconds: Specifies the interval in seconds for retransmitting LSP packets, ranging from 1 to 300.

Description Use the isis timer retransmit command to configure the interval for retransmitting LSP packets over point-to-point link.

Use the undo isis timer retransmit command to restore the default of 5s.

You need not use this command over a broadcast link where no LSP response is required.

Related commands:

n

Examples

isis timer lsp.

■This command is not available in loopback interface view.

■Configure a proper time to avoid unnecessary retransmissions.

#Configure the LSP retransmission interval as 10 seconds for the serial2/0 interface.

<Sysname> system-view

[Sysname] interface serial2/0

[Sysname-Serial2/0] isis timer retransmit 10

is-level

Syntax is-level { level-1 level-1-2 level-2 }

undo is-level

View IS-IS view