3Com MSR 30, MSR 50 manual Ccc interface out-interface, Undo ce ce-name

1646 CHAPTER 97: MPLS L2VPN CONFIGURATION COMMANDS

Currently, only L2VPNs using ATM, PPP, FR, or HDLC encapsulation support the control word option.

n If the outgoing interface is an Ethernet or VLAN interface, you need to use the nexthop ip-address combination to specify the IP address of the next hop. Otherwise, you need to use the out-interfaceinterface-type interface-number combination to specify the outgoing interface.

Example # Create a remote CCC connection from CEA to CEB, setting the incoming interface to that connecting CEA, namely Serial 2/0; the outgoing interface to that connecting the P router, namely Serial 2/1; the incoming label to 100; and the outgoing label to 200.

<Sysname> system-view

[Sysname] ccc CEA-CEB interface serial 2/0 in-label 100 out-label 20

0 out-interface serial 2/1

ccc interface out-interface

Syntax ccc ccc-connection-name interface interface-type interface-number out-interfaceinterface-type interface-number

undo ccc ccc-connection-name

View System view

Parameter ccc-connection-name: Name for the CCC connection, a string of 1 to 20 characters. It is used for uniquely identifying a CCC connection on a PE.

interface interface-type interface-number: Specifies the interface for connecting the first CE by its type and number.

out-interfaceinterface-type interface-number: Specifies the interface for connecting the second CE by its type and number.

Description Use the ccc interface out-interfacecommand to create a local CCC connection between two CEs connected to the same PE.

Use the undo ccc command to delete a CCC connection.

Example # Create a local CCC connection between two CEs connected to the same PE.

<Sysname> system-view

[Sysname] ccc ccc-connect-1 interface ethernet 1/0 out-interface ethernet 1/1

ce

Syntax ce ce-name [ id ce-id [ range ce-range ] [ default-offsetce-offset ] ]

undo ce ce-name