3Com MSR 30, MSR 50 manual Ip route-static default-preference

1220 CHAPTER 81: STATIC ROUTING CONFIGURATION COMMANDS

Examples # Configure a static route, whose destination address is 1.1.1.1/24, next hop address is 2.2.2.2, tag value is 45, and description information is “for internet & intranet”.

<Sysname> system-view

[Sysname] ip route-static 1.1.1.1 24 2.2.2.2 tag 45 description for

internet & intranet

#Configure a static route for a VPN instance named vpn1: the destination address is 1.1.1.1/16 and the next hop address is 1.1.1.2, which is the address of this VPN instance.

<Sysname> system-view

[Sysname] ip route-static vpn-instance vpn1 1.1.1.1 16 vpn-instance

vpn1 1.1.1.2

ip route-static default-preference

Syntax ip route-static default-preference default-preference-value

undo ip route-static default-preference

View System view

Parameters default-preference-value: Default preference for static routes, which is in the range of 1 to 255.

Description Use the ip route-staticdefault-preferencecommand to configure the default preference for static routes.

Use the undo ip route-static default-preference command to restore the default.

By default, the default preference of static routes is 60.

Note that:

■If no preference is specified when configuring a static route, the default preference is used.

■When the default preference is re-configured, it applies to newly added static routes only.

Related commands: display ip routing-tableon page 929 and ip route-static.

Examples # Set the default preference of static routes to 120.

<Sysname> system-view

[Sysname] ip route-static default-preference 120