1891

fr traffic-policing

Syntax fr traffic-policing

undo fr traffic-policing

View Frame relay interface view, MFR interface view

Parameters None

Description Use the fr traffic-policingcommand to enable FRTP function.

Use the undo fr traffic-policingcommand to disable FRTP function.

FRTP function is applied to the inbound interface of FR packets on a router.

Furthermore, it is only used at the DCE end of a FR network.

When configuring traffic policing for an inbound interface, you must first set the

DCE as a FR switching by using the fr switching command.

Related commands: fr class.

Examples # Enable the traffic policing function on the interface Serial 1/0.

<Sysname> system-view

[Sysname] interface Serial 1/0

[Sysname-Serial1/0] fr traffic-policing

fr traffic-shaping

Syntax fr traffic-shaping

undo fr traffic-shaping

View Frame relay interface view, MFR interface view

Parameters None

Description Use the fr traffic-shapingcommand to enable FRTS function.

Use the undo fr traffic-shapingcommand to disable FRTS function.

By default, FRTS function is disabled.

The FRTS function is applied to the outbound interface of a router, generally used at the DTE end of a FR network.

Related commands: fr class, fr-class,fr dlci.

Page 1891
Image 1891
3Com MSR 50, MSR 30 manual Fr traffic-policing, Fr traffic-shaping, Syntax fr traffic-policing Undo fr traffic-policing