Dell Command Line Interface Enabled Directs the BMC to output a, Input buffer is ready to accept

Table 4-12. omconfig chassis remoteaccess (continued)

name=value pair 1	name=value pair 2	Description
config=
config=terminalmode	echocontrol=enabled disabled	enabled: Enables characters to be sent to
(continued)		the screen.
		disabled: Disables characters to be sent to
		the screen.
	handshakingcontrol=enabled disabled	enabled: Directs the BMC to output a
		character sequence that indicates when its
		input buffer is ready to accept
		another command.
		disabled: Does not direct the BMC to output
		a character sequence that indicates when its
		input buffer is ready to accept
		another command.
	inputlinesequence=cr null	cr: The console uses <CR> as a new
		line sequence.
		null: The console uses <NULL> as a new
		line sequence.
	lineediting=enabled disabled	enabled: Enables line editing as a line
		is typed.
		disable: Disables line editing as a line is typed.
	newlinesequence=none crlf null cr	none: BMC does not use a
	lfcr lf	termination sequence.
		crlf: BMC uses <CR-LF> as a new line
		sequence when the BMC writes a new line to
		the console.
		null: BMC uses <Null> as a new line
		sequence when the BMC writes a new line to
		the console.
		cr: BMC uses <CR> as a new line sequence
		when the BMC writes a new line to
		the console.
		lfcr: BMC uses <LF-CR> as a new line
		sequence when the BMC writes a new line to
		the console.
		lf: BMC uses <LF> as a new line sequence
		when the BMC writes a new line to
		the console.

omconfig: Managing Components Using the Instrumentation Service

81