Dell Command Line Interface manual Omconfig chassis currents, Accessconsoleredir= true false

Table 4-4. omconfig chassis bmc config=user id=<user id> dracusergroup=custom

name=value pair 1	name=value pair 2	Description
config=
config=user	id=user id	logindrac= true false
	dracusergroup=custom
		configuredrac= true false
		configure users= true false
		clearlogs= true false
		executeservercommands= true false
		accessconsoleredir= true false
		accessvirtualmedia= true false
		testalerts= true false

omconfig chassis currents

Use the omconfig chassis currents command to set amperage probe warning thresholds. As with other components, you can view both warning and failure threshold values, but you cannot set failure thresholds. Your system's manufacturer sets the minimum and maximum failure thresholds.

NOTE: Settable thresholds vary from one system configuration to another.

NOTE: Systems that contain embedded systems management 3 (ESM3) capabilities do not allow you to set warning threshold values to default values.

Valid Parameters for Current Warning Thresholds

Table 4-5 shows the valid parameters for setting current warning thresholds:

NOTE: The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status, readings, and thresholds set for all current probes present on your system. "Current probes are not present in all systems". If you specify the index, Server Administrator displays a summary for a specific current probe.

Table 4-5. omconfig chassis currents

name=value pair	Description
index=<n>	Number of the probe or probe index (must be specified).
warnthresh=default	Sets minimum and maximum warning thresholds to default.
minwarnthresh=<n>	Minimum warning threshold (3 decimal places).
maxwarnthresh=<n>	Maximum warning threshold (3 decimal places).

70

omconfig: Managing Components Using the Instrumentation Service