Dell Comprehensive Guide to omreport and omreport chassis Commands for Network Card Management

If your system supports redundant memory, the redundancy output may resemble the following:

Memory Redundancy
Redundancy Status	: Full
Fail Over State	: Inactive
Redundancy Configuration	: SpareBank
Attributes	: Location
Memory Array 1	: Proprietary Add-on Card
Attributes	: Use
Memory Array 1	: Unknown
Attributes	: Installed Capacity
Memory Array 1	: 1536 MB
Attributes	: Maximum Capacity
Memory Array 1	: 12288 MB
Attributes	: Slots Available
Memory Array 1	: 12

omreport chassis nics

Use the omreport chassis nics command to view NIC properties. Type:

omreport chassis nics index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays properties about all NICS on your system. If you specify the index, Server Administrator displays properties for a specific NIC.

Values display for the following fields: Index (number of the NIC card), IP address, Vendor, Description, and Connection Status.

omreport chassis ports

Use the omreport chassis ports command to view properties of your system’s parallel and serial ports.

Values display for the following fields: Port Type, External Name, Base I/O Address, IRQ Level, Connector Type, and Maximum Speed.

Port Type is the detailed type of each system port, from the more general serial, parallel, and USB ports to the names of ports by device type connected to it, for example, pointing device or keyboard.

External Name is the name of the port, such as serial or parallel, USB, mouse, keyboard, and so on.

Base I/O Address is the starting I/O address expressed in hexidecimal.

IRQ Level is a hardware interrupt on a system. The hardware interrupt signals the system's CPU that an event has started or ended in a peripheral component such as a modem or printer. When communicated over a peripheral component interconnect card, the IRQ level is a standard way to identify the type of device that is sending the interrupt request.

34

omreport: Viewing System Status Using the Instrumentation Service