Dell Command Line Interface manual Fan is running too slow or not at all, Event=hardwarelogfail

Table 4-24. omconfig system platformevents (continued)

Event Name	Description
event=fanfail	Sets action or enables/disables alert generation when a fan probe detects that the
	fan is running too slow or not at all.
event=hardwarelogfail	Enables/disables alert generation when a hardware log detects a failure value.
event=intrusion	Sets action or enables/disables alert generation when a chassis has been opened.
event=powerwarn	Sets action or enables/disables alert generation when a power device probe detects
	that the power supply, voltage regulator module, or DC to DC converter is
	pending a failure condition.
event=powerabsent	Sets action or enables/disables alert generation when a processor probe detects
	that the power supply is absent.
event=powerfail	Sets action or enables/disables alert generation when a power device probe detects
	that the power supply, voltage regulator module, or DC to DC converter has failed.
event=processorwarn	Sets action or enables/disables alert generation when a processor probe detects
	that the processor is running at less than peak performance or speed.
event=processorfail	Sets action or enables/disables alert generation when a processor probe detects
	that the processor has failed.
event=processorabsent	Sets action or enables/disables alert generation when a processor probe detects
	that the processor is absent.
event=redundegrad	Sets action or enables/disables alert generation when the system’s fans and/or
	power supplies become inoperative, resulting in less than full redundancy for that
	component.
event=redunlost	Sets action or enables/disables alert generation when the system’s fans and/or
	power supplies become inoperative, resulting in a lost or a "no redundant
	components working" condition for that component.
event=tempwarn	Sets action or enables/disables alert generation when a temperature probe detects
	that the temperature is approaching the maximum high or low limits.
event=tempfail	Sets action or enables/disables alert generation when a temperature probe detects
	that the temperature is either too high or low for proper operation.
event=voltfail	Sets action or enables/disables alert generation when a voltage probe detects that
	the voltage is too low for proper operation.
event=watchdogasr	Enables or disables alert generation configured by the ASR when the system has
	hung or is not responding.

94

omconfig: Managing Components Using the Instrumentation Service