Dell Command Line Interface manual List lst, 190

The available formats include:

•List (lst)

•Semicolon-separated values (ssv)

•Table (tbl)

•Raw xml (xml)

•Custom delimited format (cdv)

Syntax for the formatting option is:

<command> -fmt <format option>

For example, type:

omreport system summary -fmt tbl

where -fmt tbl specifies table format.

You can combine the formatting option with the option to direct output to a file. For example, type:

omreport system summary -fmt tbl -outa summary.txt

where -fmt tbl specifies table format and -outaspecifies that you append the command results to a file called summary.txt.

List (lst)

The default format is lst or list format. Use this format when you want to optimize output for simple readability. You need to specify a format for your command output only if you want a format other than lst format.

To see the following example command output in lst format, type:

omreport system summary

No special formatting option is required because list format is the default display format. The network data part of the example system summary appears as follows:

--------------

Network Data

--------------

Network Interface Card 0 Data

IP Address: 143.166.152.108

Subnet Mask: 255.255.255.0

Default Gateway: 143.166.152.1

MAC Address: 00-02-b3-23-d2-ca

190

Working With CLI Command Results