Dell Command Line Interface manual Example Set Alert Action Commands

Table 4-21. Events for Which You Can Set Alert Actions (continued)

Event Name	Description
event=powersupplywarn	Sets actions when a power supply probe detects a warning value.
event=processorwarn	Sets actions when a processor probe detects a warning value.
event=processorfail	Sets actions when a processor probe detects a failure value.
event=redundegrad	Sets actions when a redundant component becomes inoperative, resulting in
	less than full redundancy for that component.
event=redunlost	Sets actions when one or more redundant components become inoperative,
	resulting in a lost or a "no redundant components working" condition for
	that component.
event=tempwarn	Sets actions when a temperature probe detects a warning value.
event=tempfail	Sets actions when a temperature probe detects a failure value.
event=voltwarn	Sets actions when a voltage probe detects a warning value.
event=voltfail	Sets actions when a voltage probe detects a failure value.
event=watchdogasr	Sets actions that Server Administrator performs on the next system startup
	after a watchdog Automatic System Recovery (ASR) is performed for a hung
	operating system.

Example Set Alert Action Commands

The examples below are valid example commands. For each successful command issued, the following message appears:

Alert action(s) configured successfully.

Example Current Probe Actions

To disable system console alert if a current probe detects a warning event, type:

omconfig system alertaction event=currentwarn alert=false

To enable broadcast messages if a current probe detects a failure event, type:

omconfig system alertaction event=currentfail broadcast=true

Example Fan Probe Actions

To generate alerts when a fan probe detects a failure value, type:

omconfig system alertaction event=fanfail alert=true

Example Chassis Intrusion Actions

To clear all alert actions for chassis intrusion, type:

omconfig system alertaction event=intrusion clearall=true

omconfig: Managing Components Using the Instrumentation Service

91