Dell Command Line Interface Omconfig Remove Dead Segments, Omconfig Clear Physical Disk, 175

Example Syntax

In this example, you want to cancel the rebuild or physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers:

To cancel the rebuild of the physical disk described in this example, enter:

omconfig storage pdisk action=cancelrebuild controller=1 pdisk=0:3

Example for SAS Controllers:

To cancel the rebuild of the physical disk described in this example, enter:

omconfig storage pdisk action=cancelrebuild controller=1 pdisk=0:2:3

omconfig Remove Dead Segments

Use the following omconfig command syntax to recover unusable disk space. See the online help for more information.

Complete Syntax

omconfig storage pdisk action=removedeadsegments controller=id pdisk=<PDISKID>

where id is the controller ID. The <PDISK> variable specifies the physical disk.

To obtain these values, enter omreport storage controller to display the controller IDs and then enter omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.

Example Syntax

In this example, you want to remove dead disk segments on physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers:

To remove dead segments on the physical disk described in this example, enter:

omconfig storage pdisk action=removedeadsegments controller=1 pdisk=0:3

Example for SAS Controllers:

To remove dead segments on the physical disk described in this example, enter:

omconfig storage pdisk action=removedeadsegments controller=1 pdisk= 0:2:3

omconfig Clear Physical Disk

Use the following omconfig command to clear data or a configuration from a physical disk.

Using the Storage Management Service

175