Dell Command Line Interface manual Omconfig Global Commands, Omreport Virtual Disk Status, 144

omreport Virtual Disk Status

Table 8-14. omreport Virtual Disk Commands

Required Command Levels (1, 2, 3) Optional name=value pairs	Use
omreport storage vdisk	Displays property information for
	all virtual disks on all controllers.
controller=id	Displays all virtual disks on the
where id is the controller number.	specified controller.
For example: controller=0.

controller=id vdisk=id

where id is the controller number and the virtual disk number. For example: controller=0 vdisk=1.

Displays the specified virtual disk on the controller.

omconfig Global Commands

The following sections provide the omconfig command syntax required to execute the global commands. When executed, these commands apply to all controllers. These global commands also correspond to the global tasks provided by the Storage tree view object’s Information/Configuration subtab.

Table 8-15. omconfig Global Commands

Required Command Levels (1, 2, 3)	Optional name=value pairs
omconfig storage globalinfo
	action=enablests
	action=disablests
	action=globalrescan

omconfig Global Enable Smart Thermal Shutdown

By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a critical temperature of 0 or 50° Celsius. If you have implemented connector redundancy on the PV220S and PV221S enclosures, however, you can specify that only the enclosure and not the operating system and server be shut down when the enclosure reaches a critical temperature of 0 or 50° Celsius. Specifying that only the enclosure be shutdown during excessive temperatures is known as Smart Thermal Shutdown. See the online help for more information.

Use the following omconfig command syntax to enable smart thermal shutdown.

Complete Syntax

omconfig storage globalinfo action=enablests

144

Using the Storage Management Service