Dell Command Line Interface Adding System Information, 111, Command Name=value name=value pair

Adding System Information

System information includes the primary user of the system, the phone number for the primary user, and the system location. Table 5-10 shows the valid parameters for adding system information.

Table 5-10. omconfig system assetinfo info=system

Command	Command	Command	name=value name=value pair 2	Use
level 1	level 2	level 3	pair 1

omconfig

system

assetinfo

info=system

location=<text> Location of the system.

primaryphone=<n> Phone number of the system's primary user.

primaryuser=<user> Primary user of the system.

Example Command for Adding System Information

To provide a value for a system parameter, type a command of the form: omconfig system assetinfo info=system <name=value pair 2>. For example, type:

omconfig system assetinfo info=system location=firstfloor

The following message appears:

Asset information set successfully.

You can enter more than one omconfig system assetinfo command at the same time, as long as all of the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example Commands for Adding Acquisition Information."

omconfig system assetinfo: Editing Cost of Ownership Values

111