Dell Command Line Interface manual Adding Owner Information, 108

Adding Owner Information

The owner is the party that holds legal property title to the system. Table 5-7 shows the valid parameters for adding owner information.

Table 5-7. omconfig system assetinfo info=owner

Command	Command	Command name=value pair 1 name=value pair 2	Use
level 1	level 2	level 3

omconfig

system

assetinfo

info=owner

insuranceco=<company>	Name of the insurance
	company that insures the
	system.
ownername=<business>	Business entity that owns the
	system.
type=owned leased	Whether the user of the system
rented	owns, leases, or rents the
	system.

Example Command for Adding Owner Information

To provide a value for an owner parameter, type a command of the form: omconfig system assetinfo info=owner <name=value pair 2>. For example, type:

omconfig system assetinfo info=owner type=rented

The following message appears:

Asset information set successfully.

You can enter more than one omconfig system assetinfo command at the same time, as long as all of the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example Commands for Adding Acquisition Information."

108

omconfig system assetinfo: Editing Cost of Ownership Values