Dell Command Line Interface manual Sets connection speed to 9600 bits, Per second, To send

Table 4-12. omconfig chassis remoteaccess (continued)

name=value pair 1	name=value pair 2	Description
config=
config=nic	vlanenable=true false	true: Enables the virtual LAN identification.
(continued)		false: Disables the virtual LAN identification.
	vlanid=number	number: Virtual LAN identification in the
		range of 1 to 4094.
	vlanpriority=number	number: Priority of virtual LAN identification
		in the range of 0 to 7.
config=serial	baudrate=9600 19200 38400 57600	9600: Sets connection speed to 9600 bits
	115200	per second.
		19200:Sets connection speed to 19200 bits
		per second.
		38400: Sets the volatile and nonvolatile
		connection speed to 38400 bits per second.
		57600: Sets the volatile and nonvolatile
		connection speed to 57600 bits per second.
		115200: Sets the volatile and nonvolatile
		connection speed to 115200 bits per second.
		NOTE: Baud rates of 9600 and 19200 are
		supported on PowerEdge 1800, 1850, 2800, and
		2850 systems.
		Baud rates of 9600, 19200, 38400, and 57600 are
		supported on PowerEdge x9xx systems.
		Baud rate of 115200 is supported on certain
		systems that have a DRAC 5 installed.
	flowcontrol=none rtscts	none: No control over the flow of
		communication through the serial port.
		rtscts: RTS is ready to send and CTS is clear
		to send.

78

omconfig: Managing Components Using the Instrumentation Service