3Com MSR 50, MSR 30 manual Select-stop, Syntax select-stop Undo select-stop, 2641

2641

Table 693 Meanings of values

Value	Meaning
3	VoFR voice entity

Description Use the select-ruletype-firstcommand to configure a rule for voice entity type selection priority.

Use the undo select-ruletype-firstcommand to remove a rule for voice entity type selection priority.

By default, voice entities are not selected according to their types.

The command is used to configure the sequence of voice entity type selection priority. If different types of voice entities are qualified for a call connection, the system selects a suitable voice entity according to the voice entity type selection priority rule configured by the select-ruletype-firstcommand. The order of inputting the parameters determines voice entity type priorities. The system selects the first type first, then the second type, and finally the third type.

Related command: select-rulerule-orderand select-rulesearch-stop.

Example # Configure the system to select VoIP voice entities in the order of

VoIP->POTS->VoFR.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] select-rule type-first 2 1 3

select-stop

Syntax select-stop

undo select-stop

View Voice entity view

Parameter None

Description Use the select-stopcommand to disable the voice entity search function.

Use the undo select-stopcommand to enable the voice entity search function.

By default, the voice entity search function is enabled.

Related command: select-rulerule-orderand select-ruletype-first.

Example # Disable the voice entity search function for voice entity 10.