3Com MSR 30, MSR 50 manual Reaction trap, Route-option bypass-route

2282 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

	[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail
	threshold-type consecutive 3 action-type trigger-only
reaction trap
Syntax	reaction trap { probe-failure consecutive-probe-failurestest-complete test-failure
	cumulate-probe-failures }
	undo reaction trap { probe-failure test-complete test-failure }
View	Any NQA test type view
Parameter	probe-failureconsecutive-probe-failures: Specifies to send a trap to the network
	management server after consecutive-probe-failuresin an NQA test.
	consecutive-probe-failuresis the number of consecutive probe failures in a test, in
	the range 1 to 15.
	test-complete: Specifies to send a trap to indicate that the test is completed.
	test-failurecumulate-probe-failures: Specifies to send a trap to the network
	management server if the total number of probe failures in an NQA test is larger
	than or equal to cumulate-probe-failures. For one test, the trap is sent only when
	the test is completed. cumulate-probe-failuresis the total number of consecutive
	probe failures in a test, in the range 1 to 15.
Description	Use the reaction trap probe-failcommand to configure to send traps to
	network management server under specified conditions.
	Use the undo reaction trap probe-failcommand to restore the default.
	By default, no traps are sent to the network management server.
Example	# Configure to send a trap after five consecutive probe failures in an ICMP-echo
	test.
	<Sysname> system-view
	[Sysname] nqa entry admin test
	[Sysname-nqa-admin-test] type icmp-echo
	[Sysname-nqa-admin-test-icmp-echo] reaction trap probe-failure 5

route-option bypass-route

Syntax route-option bypass-route

undo route-option bypass-route

View DLSw/FTP/HTTP/ICMP-echo/SNMP/TCP/UDP-echo/UDP-jitter test type view

Parameter None