3Com MSR 50, MSR 30 manual Display fr class-map, Related commands wfq, pq, fr pvc-pq, 1879

1879

View Frame relay class view

Parameters cql cql-index: Group number of Custom Queuing, ranging from 1 to 16.

Description Use the cq command to set the FR virtual circuit queuing to Custom Queuing (CQ).

Use the undo cq command to restore the FR virtual circuit queuing to FIFO.

By default, the virtual circuit queuing type is FIFO.

If you use this command repeatedly on the same FR, the new configuration will overwrite the old one.

Related commands: wfq, pq, fr pvc-pq.

Examples # Apply the group10 of Custom Queuing to the FR class named test1.

<Sysname> system-view

[Sysname] fr class test1

[Sysname-fr-class-test1] cq cql 10

display fr class-map

Syntax display fr class-map{ fr-classclass-name interface interface-type interface-number }

View Any view

Parameters class-name: FR class name, a string of 1 to 30 characters.

interface-typeinterface-number: Specifies an interface by its type and number.

Description Use the display fr class-mapcommand to view information on FR class to interface map, including DLCIs of interfaces, subinterfaces on the interfaces and their DLCIs.

When configuring the command, you can specify a FR class name or main interface, but not a subinterface.

Examples # Display information on the map of FR class to the interface Serial1/0.

<Sysname> display fr class-map interface Serial 1/0

Serial1/0
fr-class ts
Serial1/0.1
fr-class ts
fr dlci 100	Serial1/0
fr-class ts
fr dlci 200	Serial1/0.1
fr-class ts